Shure Incorporated
6/16
•
◦
◦
◦
◦
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Assembly kit (90A48840):
Flathead screwdriver
Cable ties (2)
Strain reliefs (2)
Terminal plug
Installing the Mute Button
The mute button fits in tables that are between 15 to 30 mm (.59 to 1.18 inches) thick.
Drill a 30 mm (1 1/8 inch) hole in the table.
Place the color ring around the hole.
Insert the mute button and its cable into the hole.
Note:
Remove the protective blue film from the top of the mute button.
Insert a compatible microphone into the mute button.
Slide the spacer onto the mute button so the rubber side is flush against the bottom of the table.
Pull the cable through the side opening on the spacer.
Slide a wingnut under the spacer and tighten by hand, and then turn an additional 90 degrees (¼ turn). Do not over
tighten the wingnut.
Connect the adapter to the 5-pin XLR microphone.
Plug the mute button cable into the adapter.
Wire a cable to the 6-pin block connector and connect to the adapter.
Содержание A400MB
Страница 7: ...Shure Incorporated 7 16...
Страница 10: ...Shure Incorporated 10 16...