7
Ordercode: 61133
WTF-FZ1500 1500W DMX Fazer
Installation
Remove all packing materials from the WTF-FZ1500. Check if all foam and plastic padding is removed,
especially in the fog output area.
Carefully add a fog liquid to the fog liquid tank. Do not overfill the tank! Use the WTF only with the
Showtec fog liquids (ordercodes:
). Any other types of liquid can damage the
unit.
The unit can be operated at floor level or be placed on any regular surface.
Regardless of the installation method, the device must always be placed in horizontal position.
The maximum inclination angle of the device should not exceed 15º.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Always follow the instructions from this manual and from local authorities.
Precautions for operation
Using a damaged or an improperly installed machine can lead to death, serious injury or
property damage. Always inspect the machine thoroughly before operation.
Missing or obscured safety symbols on the machine can cause unawareness, which in turn can
lead to death, serious injury or property damage. Make sure all safety symbols are correctly in
place and visible. See front side of the device.
Setup and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 110 V specification product on 240 V power, or vice versa.
Note:
●
Always monitor the fog tank liquid level!
●
Do not exceed the maximum fog liquid level. DO NOT OVERFILL!
●
You can only fill 80 % of the tank (not more than 4 L in the tank, due to compression).
●
Do not operate the fazer without fog liquid. It can permanently damage the device!
●
Never aim the output nozzle directly at people.
●
Never shut down the WTF while the device is operating.
●
Installation and operation of the WTF requires professional and trained personnel.
Содержание WTF-F1000
Страница 20: ...2020 Showtec...
