SHOWTEC WTF-F1000, Руководство пользователя

Страница: 10 / 20

9
Ordercode: 61133
WTF-FZ1500 1500W DMX Fazer
Start-up
Plug the power cord into a grounded electrical outlet. The machine will now re-heat to the proper
operating temperature. Once the proper temperature has been reached, the main menu will appear.
Control Modes
There are 2 modes: ● Manual
● DMX-512 (1CH, 1CH, 2CH)
One WTF (Manual)
01)
Leave at least 0,5 meter on all sides for air circulation.
02) Plug the end of the electric mains power cord into a proper electric power supply socket.
03) When the WTF is not connected with a DMX cable, it functions as a stand-alone device.
04) Please see page 14 for more information about Manual mode.
Multiple WTFs (DMX Control)
01)
Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Plug the end of the electric mains power cord into a proper electric power supply socket.
03) Use a 3-pin/5-pin XLR cable to connect the WTFs and other devices.
04) Link the units as shown in Fig. 07. Connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.
05) Supply electric power: Plug electric mains power cords into proper electric power supply sockets,
starting with the first unit. Do not supply power before the whole system is set up and connected
properly.
Multiple WTFs DMX Setup
Fig. 07
Note: Link all cables before connecting electric power