SHOWTEC WTF-F1000, Руководство пользователя

Страница: 15 / 20

14
Ordercode: 61133
WTF-FZ1500 1500W DMX Fazer
8. Quick Mode
In this menu you can set whether the device, upon power-up, will perform last action from before
shutdown.
01)
In main menu, press the MENU button until the display shows QUICK.
02) Press the UP/DOWN buttons to select ON/OFF.
03) Press the ENTER button to confirm. The display will show READY TO FAZE.
04) If you selected ON, upon power-up, the device will perform last action from before shutdown.
9. Device Information
In this menu you can view the device’s parameters.
01)
In main menu, press the MENU button until the display shows INFO.
02) Press the UP/DOWN buttons to view the following 3 parameters:
Current frequency
AC current voltage
Software version
03)
Press the ENTER button to confirm. The display will show READY TO FAZE.
Manual Mode
If you wish to use the WTF in Manual mode, unplug the DMX cable!
Manual mode will not work if the DMX cable is connected!
1. Timer Mode
In this menu you can set Timer mode.
01)
Set the interval and duration times. (See page 13 for more information.)
02) Set the timer output volume. (See page 13 for more information.)
03) Set the fan speed. (See page 13 for more information.)
04) Press the ENTER button to confirm. The display will show READY TO FAZE.
05) Press the UP button to activate Timer mode.
06) Press the ENTER button to stop Timer mode.
2. Volume Mode
In this menu you can set Volume mode.
01)
Set the output volume. (See page 13 for more information.)
02) Set the fan speed. (See page 13 for more information.)
03) Press the ENTER button to confirm. The display will show READY TO FAZE.
04) Press the DOWN button to activate Volume mode.
05) Press the ENTER button to stop Volume mode.
DMX Channels
1 Channel
Channel 1 – Faze effect
0–5
Faze effect OFF, fan speed: 100 %
6–255 Faze effect ON: 1–100 %, fan speed: 100 %