SHOWTEC WTF-F1000, Руководство пользователя

Страница: 14 / 20

13
Ordercode: 61133
WTF-FZ1500 1500W DMX Fazer
1. Interval Time
In this menu you can set the interval, i.e. the time between fog bursts.
01)
Press the MENU button until the display shows INTERVAL.
02) Press the UP/DOWN buttons to set the interval time. The adjustment range is 1–999 seconds.
03) Press the ENTER button to confirm. The display will show READY TO FAZE.
2. Duration Time
In this menu you can set the fog burst duration.
01)
Press the MENU button until the display shows DURATION.
02) Press the UP/DOWN buttons to set the duration time. The adjustment range is 1–999 seconds.
03) Press the ENTER button to confirm. The display will show READY TO FAZE.
3. Timer Output
In this menu you can set the output volume in Timer mode.
01)
Press the MENU button until the display shows TIMER.
02) Press the UP/DOWN buttons to set the output volume. The adjustment range is 1–100 %, from low to
high output.
03) Press the ENTER button to confirm. The display will show READY TO FAZE.
4. Volume Output
In this menu you can set the output volume in Volume mode.
01)
Press the MENU button until the display shows VOLUME.
02) Press the UP/DOWN buttons to set the output volume. The adjustment range is 1–100 %, from low to
high output.
03) Press the ENTER button to confirm. The display will show READY TO FAZE.
5. Fan Speed
In this menu you can set the fan speed.
01)
Press the MENU button until the display shows FAN.
02) Press the UP/DOWN buttons to set the fan speed. The adjustment range is 20–100 %, from slow to fast.
03) Press the ENTER button to confirm. The display will show READY TO FAZE.
6. DMX Address
In this menu you can set the DMX address.
01)
In main menu, press the MENU button until the display shows DMX-512.
02) Press the UP/DOWN buttons to select the required address. The adjustment range is 001–511.
03) Press the ENTER button to confirm. The display will show READY TO FAZE.
7. DMX Mode
In this menu you can set the DMX mode.
01)
In main menu, press the MENU button until the display shows DMX-MODE.
02) Press the UP/DOWN buttons to choose one of the 3 DMX modes:
1-channel mode
2-channel mode
Sync mode (1-channel mode)
03)
Press the ENTER button to confirm. The display will show READY TO FAZE.