9
Control Modes
FUNCTIONS:
There are 4 modes:
• Static Colors (manual)
• Built-in programs (Auto)
• Master/Slave
• DMX512 (3, 3, 4, 4, 5, 6 or 12 Channels)
One Spectral
(
Static Colors
)
1)
Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
2)
When the Spectral is not connected by a DMX-cable, it functions as a stand-alone device.
Please
see page 14 for more information about the static colors.
One
Spectral
(
Built-in Programs
)
1.
Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
2.
When the Spectral is not connected by a DMX-cable, it functions as a stand-alone device.
Please
see page 15 for more information about the built-in programs.
Multiple Spectrals (Master/Slave control)
1.
Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
2.
Use a 3-p XLR cable to connect the Spectral.
The pins:
1.
Earth
2.
Signal -
3.
Signal +
3.
Link the units as shown in (Fig. 3), Connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.
You can
use the same functions on the master device as described on page 14+15 (Static Colors or Built-in
Programs
). This means on the master device you can set your desired operation Mode and all slave
devices will react the same as the master device.
Multiple Spectrals (Master/Slave control)
Fig. 3
Multiple Spectrals (DMX Control)
1.
Plug the end of the electric mains power cord into a proper electric power supply socket
.
2.
Use a 3-p XLR cable to connect the Spectrals
.
3.
Link the units as shown in (figure 4), Connect a DMX signal cable from the first unit's DMX "out" socket
to the second unit's "in" socket. Repeat this process to link the second, third, and fourth units
.
4.
Supply electric power: Plug the end of the mains power cord into proper electric power supply
sockets. Do so for all units and the controller
. Do not supply power before the whole system is set up
and connected properly.
Содержание Spectral 2500 Zoom Tour
Страница 15: ...13 Menu Overview These 3 menus are only visible once you have entered the correct password in menu CAL...
Страница 27: ...25 Beam Angle and illuminance...
Страница 31: ......
