SHOWTEC Spectral 2500 Zoom Tour, Руководство по эксплуатации продукта

Страница: 21 / 31

19
4) Enter DIM Mode to select a certain dimmer mode and dimmer speed .
When DIMMER is set to OFF, then RGBW and the MASTER DIMMER are linear.
Dim 1/2/3/4 are speed modes of the non linear dimmer. DIM1 is fastest, and DIM4 is slowest.
The DIM
setting does not have any effect in TOUR mode. The DMX setting overrules the DIM setting.
5) Enter the DERR Menu to store or blackout a DMX signal.
Menu SAVE is to save the last DMX data, in case of a DMX signal error.
Menu BLAC is to blackout the device in case of a DMX signal error.
6) Enter the ZOOM Menu to calibrate the position of POS1 and POS2.
Set zoom position to 0 for the smallest zoom position. Selecf BASE for defaulf zoom position (zoom=0)
8. Activate Password
1) Enter the KEY-LOCK mode to select, whether the access password is On or Off .
2) The Access Password : UP + DOWN + UP + DOWN .
3) When you have selected ON in menu KEY and then pressed ENTER, it will take 30 seconds before the
Spectral is locked.
4) When the password is activated, the display will ask for a password each time the fixture is powered
on.
9. Calibration
1) Enter the CAL menu to unlock the 3 hidden menus .
2) In order to unlock the 3 menus, the password must be entered.
Password : UP > DOWN > UP > DOWN . Then press ENTER to confirm your password.
The WT, RGBW or ZOOM menu will now appear.