Check that the default settings for all three windows are as
below. Please note that it is important that the system is set as
8 rows/zone in <System Setup>.
Once the LEDMATRIX hardware and interface cards are set up as described in sections 2 &
3. The LED MATRIX screen will now automatically display the area at the top-left corner of
the <DESKTOP DISPLAY> on the PC MONITOR. The size of the area displayed will
correspond directly to the resolution of the LED MATRIX screen. If the LED MATRIX
screen's resolution is 256 x 128 (i.e 256 columns x 128 rows of LED CLUSTERS then the
top-left 256 x 128 pixels of the <DESKTOP DISPLAY> will be seen on the LED MATRIX by
starting theLED studio software it is possible to select a different area of the <DESKTOP
DISPLAY> to be displayed by the LED MATRIX screen.
Starting the LEdstudio software will allow the user to create, save and play programs
designed to be automatically displayed in the defined area. This allows for simple display
and editing of any file imported into the LEDstudio software.
4.4
MAIN OPERATION CONTROL
PANEL & DISPLAY SCREEN
Figure 4.4 Display Window & Control Panel
.
The main operation of this software is comprised of 2 operation windows: <Display window>
and <Control Panel>.
4 LEDstudio(SOFTWARE)
24
2006.6.28
