1.1
PRODUCT INTRODUCTION
1.2
SYSTEM REQUIREMENTS
The LED FLOOR TILE is a system that is suitable for a wide range of indoor applications
such as architectural lighting, stage lighting and floor effect applications. The system is
controlled using the simple and quick to learn LEDstudio software allowing the user to
display many different formats of pictures, videos, text and graphics.
On receiving this product, please carefully check that there has been no damage caused in
transportation and that the following parts are enclosed:
LEDstudio SOFTWARE
TRANSMITTER CARD
ref.no. T6A
1pc
DVI SIGNAL CABLE 1pc*
RS232 SIGNAL CABLE 1pc
LEDstudio CD-ROM 1pc
USER MANUAL 1pc
NET CABLE 1pc
SIGNAL CABLE 1pc
LED R16-HUB (RECEIVER) 1pc
LED R16-HUB EXTERNAL POWER SUPPLY 1pc
LED FLOOR TILE 1pc
POWER CABLE 1pc
SIGNAL CABLE 1pc
LED FLOOR TILE
* - For a LED MATRIX screen where the Width (W) <192 columns of pixels and the Height
(H)<128 rows of pixels. If a larger resolution is required, then extra RECEIVERS and
connecting wires will be required. Please review section 2.1 & 2.2 in order to understand
the requirements for your application. Please consult with your supplier before assembling
your installation.
Operating System
Windows XP/XP2
Hardware
CPU: >200MHz
Internal Memory:32M
Display: Standard VGA 256 Display(or better)
Display Card: ATI display card (note that the NVIDIA display card is not
compatible)
1
INTRODUCTION
2
2006.6.28
