3.7
MAKING ADDITIONAL NET CABLE
Standard NET CABLE cannot be used to replace the NET CABLE required to
transmit the information for the LED MATRIX system.
NOTE:
Please follow the following instructions in order to create extra NET CABLE.
Bear back the outer casing of the wire by around 30mm
The wires should now be colored as follows:
1-
white & orange
2-
orange
3-
white & green
4-
green
5-
blue
6-
white & blue
7-
white & brown
8-
brown
Twist the following pairs together so that only the plastic is touching (the metal wires
must not touch) 1&2, 3&4, 5&6, 7&8
Insert each wire into an RJ45 connector with the white & orange wire connected to PIN
1, the orange wire connected to the second PIN, etc.
Both ends of the NET WIRE are connected in this way.
3 SYSTEM CARD SETTINGS
19
2006.6.28
