SHOWTEC FX Ice Jet, Руководство пользователя

Страница: 11 / 20

10
Ordercode: 61000
FX Ice Jet
Step 2
01) Place the FX Ice Jet on a solid and even surface.
02) Screw it down (there are 4 screw holes in the base plate).
03) Use 4 screws of a length of at least 5cm and screw them in the holes intended for this in the base
plate of the FX Ice Jet.
Step 3
01) Adjust the cannon tube to change the direction of the output.
02) Ensure at all times that the coupling of the cannon tube is firmly tightened with an open-ended
spanner.
Step 4
01) The FX Ice Jet is activated as soon as it is powered by a 230V electricity source, preferably via a
dimming pack.
02) Use a 230V plug and make sure that the electricity is switched OFF!
03) Plug the FX Ice Jet into the electricity socket of a Showtec Relay Pack, Multidim or a Single MKII.
04) However you should be able to close the valve in case of a power outage.