SHOWTEC FX Blaster XL V1, Руководство пользователя

Страница: 13 / 36

12
Ordercode: 61031
FX Blaster XL
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
The Showtec FX Blaster XL is designed to blow confetti with the help of CO
2
gas.
As soon as the CO
₂
leaves the cylinder through the secured high-pressure hoses, it converts into gas.
This formation of gas is accompanied by a strong hissing sound, as well as a solid stream of smoke.
The released smoke stream depends strictly on current air humidity.
The higher the humidity, the longer the smoke stream will be.
CO
2
gas has a temperature of -70 ºC !!
The proper use of the FX Blaster XL requires utmost safety and alertness!
01)
Position the cased FX Blaster XL in the desired location.
02) Unlock and remove the top cover.