SHOWTEC FX Blaster XL V1, Руководство пользователя

Страница: 5 / 36

4
Ordercode: 61031
FX Blaster XL
● Always keep case closed while operating.
● Always allow free air space of at least 50 cm around the unit for ventilation.
● Always disconnect device from the CO
2
cylinder and the hose, when device is not used or before
cleaning! Only handle the CO
2
hose with care. Never pull out the CO
2
hose by tugging.
● Make sure that the device is not exposed to extreme heat, moisture or dust.
● Make sure that all the required safety devices are in good condition and function properly.
● Make sure that the CO
2
hose is never crimped or damaged. Check the device and the CO
2
hose
from time to time.
● If text and/or icons are missing, damaged or illegible on the FX Blaster XL, they should be replaced.
● If the woofer is obviously damaged, it needs to be replaced, so that its functions are not impaired.
● If the device is dropped or struck, disconnect CO
2
hose and cylinder immediately. Have a qualified
engineer inspect for safety before operating.
● If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
● If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
● For adult use only. Device must be installed out of the reach of children and unauthorized persons.
Never leave the unit running unattended.
● Provide sufficient lighting of the surroundings.
● The user is responsible for correct positioning and operating of the FX Blaster XL. The manufacturer will
not accept liability for unsafe situations, accidents, damages caused by:
- The misuse or incorrect installation of this device.
- Ignoring warnings or instructions as shown in this manual.
- Using the FX Blaster XL for purposes or conditions other than specified in this manual.
- Changes to the FX Blaster XL. This includes the use of other than original spare parts.
- Inadequate maintenance.
- The unauthorized removal of safety symbols, safety covers and / or guards.
- The improper use of the FX Blaster XL.
● Repairs, servicing and electric connection must be carried out by a qualified technician.
● WARRANTY: Till one year after date of purchase.