SHOWTEC FX Blaster XL V1, Руководство пользователя

Страница: 6 / 36

5
Ordercode: 61031
FX Blaster XL
CO
2
Use
The FX Blaster XL uses liquid or gaseous CO
₂
as input. The application of CO
₂
involves serious risks.
Make sure that you are well informed on these risks before installation and/or operation.
Always use approved CO
₂
cylinders, hoses and connections.
Always consult your CO
₂
supplier for regulations and instructions on safe installation and use.
Showtec is not liable for unsafe situations, accidents and damages that are the result of incorrect working
with CO
₂
gas and CO
₂
cylinders.
Inadequate installation and/or operation of a CO
₂
powered machine and CO
₂
cylinders can lead
to death or serious injury. Always follow the instructions from this manual, from your CO
₂
supplier and from
local authorities.
Indoor Use
The FX Blaster XL is designed for outdoor use and use in well-ventilated indoor spaces. When used indoors,
make sure you take the necessary preparations. These preparations could include, but are not limited to:
●
Consulting your CO
₂
supplier.
● Calculating the reduction of oxygen for the indoor space.
● Checking the location for spots where CO
₂
could accumulate and taking preventive actions.
● Installing CO
₂
monitoring devices that will warn for hazardous CO
₂
levels.
Do not use the FX Blaster XL in poorly ventilated confined spaces. Exposure to high levels of CO
₂
gas
can cause symptoms like headache, nausea, loss of consciousness or even death.
Noise Level
The environmental noise level as measured at the ear is 97 dB(A). This level of noise is only reached during
the short instances that the CO
₂
output is active. Therefore hearing protection is not necessary.
However we recommend you to wear ear protection at all times. Daily operating the FX Blaster with its
CO
₂
output noise can damage your ears in the long run.
Do not operate the FX Blaster XL close to yourself or to others for a long period of time. If you
experience any hearing loss or ringing in the ears, you should immediately stop using the unit.
Operating Determinations
● This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
● The maximum ambient temperature ta = 30 °C must never be exceeded.
● Do not expose this device to relative humidity degree higher than 75 %.
● Do not expose this device to any source of vibration.
● Operate the device in a reasonably stable temperature between -20 ºC and 30 ºC.
● If this device is operated in any other way, than the one described in this manual, the product may
suffer damages and the warranty becomes void.
● If any unauthorized alterations or repairs are performed on the device, the warranty becomes void.
● Any operation different to the ones described in this manual may lead to dangers like frostbite,
burns, shock, crash etc.