SHOWTEC EVENTSPOT 60 Q7, Руководство пользователя

Страница: 12 / 36

11
Ordercode: 42727
Eventspot 60 Q7
Sweden 2.4GHz Wireless communication module
Communication distance: depending on the transmitting power or transmitter module
Test conditions: W-DMX TRx Transmitter module, 2dBi Antenna, transmitting power
20dBm (100mW)
Range indoor: 60m (approx. through three concrete walls)
Range outdoor: 250m
Wireless DMX connection
The wireless receiving module “Pico G4 Receiver, 2.4GHz”, provided by Swedish WIRELESS SOLUTION, only
has a 2.4 GHz wireless signal receiving function. In order to match the wireless signal, please use the
Wireless DMX Micro Transmitter (
50231 ) / Black Box F-1 G4 MK2 ( 50236 ) by WIRELESS SOLUTION. To control
the status of the wireless communication, please look at the green LED indicator light on the front of the
fixture.
Wi-fi Problems:
01) No emitter/sender matching.
The LED Indicator dims for a long period of time.
02) Matching signal with one emitter, but loss of signal communication.
The LED Indicator light will light up for 100ms and then dim for 100ms; The LED will flicker quickly.
03) Communication with an emitter, but no DMX data.
The LED Indicator will light up for 900ms and then dim for 100ms; The LED will flicker slowly.
When the device is in the manual mode or built-in program mode, please ensure that the matching
2.4GHz wireless signal transmitter is OFF.
The Eventspot 60 Q7 is only a WDMX receiver and never a WDMX sender
The Eventspot 60 Q7 has a total of 4 DMX channel configurations, referred as Personalities .
The 4 Personalities are HSIC, SSP, Tour and TR16.
Each of the different personalities can be accessed from the control panel.
Disconnect from the Wireless DMX signal transmitter
The Eventspot 60 Q7 can be disconnected from the wireless DMX signal transmitter.
You can reset the W-DMX in the main menu, see page 19 for more information.
Data Cabling
To link transmitters with lightcontrollers you must obtain data cables. You can purchase DAP Audio
certified DMX cables directly from a dealer/distributor or construct your own cable. If you choose to
create your own cable please use data-grade cables that can carry a high quality signal and are less
prone to electromagnetic interference.
DAP Audio DMX Data Cables
• DAP Audio Basic microphone cable for allround use. bal. XLR/M 3-pin > XLR/F 3-pin. Ordercode
FL01150 (1,5 m), FL013 (3 m), FL016 (6 m), FL0110 (10 m), FL0115 (15 m), FL0120 (20 m).
• DAP Audio X-type data cable XLR/M 3-pin > XLR/F 3-pin. Ordercode FLX0175 (0,75 m),
FLX01150 (1,5 m), FLX013 (3 m), FLX016 (6 m), FLX0110 (10 m).
• DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®.
Ordercode FL71150 (1,5 m), FL713 (3 m), FL716 (6 m), FL7110 (10 m).
• DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®.
Ordercode FL7275 (0,75 m), FL72150 (1,5 m), FL723 (3 m), FL726 (6 m), FL7210 (10 m).
• DAP Audio 110 Ohm cable with digital signal transmission. Ordercode FL0975 (0,75 m),
FL09150 (1,5 m), FL093 (3 m), FL096 (6 m), FL0910 (10 m), FL0915 (15 m), FL0920 (20 m).
• DAP Audio DMX adapter: 3-pin/5-pin. Ordercode FLA30.