SHOWTEC EVENTSPOT 60 Q7, Руководство пользователя

Страница: 10 / 36

9
Ordercode: 42727
Eventspot 60 Q7
Overview
Fig. 01
01)
WDMX indicator LED
02) Power indicator LED
03) 1x 7-in-1 LED (RGBWA-UV-Cyan)
04) Infra red sensor
05) Adjustable zoom angle screw
06) Input adapter charger 24V DC 1A
07) Battery charger socket
08) LCD d control buttons
Installation
Remove all packing materials from the Eventspot 60 Q7 . Check that all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Charging the built-in battery
01) In order to charge the battery, you need either the included charger for Eventspot 60 Q7 or the
optional flightcase with built-in chargers (42729).
02) Turn off the power.
03) Connect the Eventspot with the included charger.
04) While the battery is charging, the red LED at the front will light up.
05) When the battery is fully charged, the green LED at the front will light up.
Important!
• Do not charge for more than 24 hours.
• Recharge within 3 days of use.
• When charging your Eventspot in the flightcase, make sure that the flightcase is open.
• Store with full load.
• Turn off the power with the menu button at the bottom, when storing for more than 7 days.
• Store in an upright position.