8
Overview
Fig. 1
1) Power on/off built in LED
Push and hold the power button for 3 seconds to switch the Eventspot 1900 mkII on or off. If the
battery needs to be charged, the LED will start blinking. If the battery is empty, the LED will dim.
2) 40W RGBA LED
3) Wireless DMX receiver
4) Battery charger socket
5) Height adjustable foot
You change the height of this foot to change the operating position of the Eventspot (max angle
10°). See the next page.
6) Power on/off switch
Use this switch to switch the Eventspot of if you’re not using the Eventspot for more than 7 days.
7) Power LED
8) Control panel
See page 13.
9) Adjustable foot release handle
10) DMX signal connector (OUT) 3-pin
11) DMX signal connector (IN) 3-pin
