SHOWTEC Eventlite 177IR, Руководство пользователя

Страница: 18 / 28

17
Ordercode: 44010
EventLITE 177IR
2. Auto Run Program
With this menu you can set the Auto run mode of the EventLITE 177IR.
01)
Press the MODE button on the device until the display shows .
02) The EventLITE will immediately start the Auto Run program.
03) Press the SETUP button to enter the menu.
04)
With you can set the speed of the Auto program.
05) With you can set the strobe frequency.
06) With you can set the number of repetitions of each step of the Auto run
program.
07) You can scroll through these options with the SETUP button.
08) With the UP/DOWN buttons you can adjust the options.
3. Sound control mode
With this menu you can set the sensitivity of the sound mode.
01)
Press the MODE button until the display shows .
02) Press the SETUP button to open this menu.
03) Press the UP/DOWN buttons to change the sensitivity of the sound control mode between
, from low to high sound sensitivity.
04) Sound-controlled mode is now active and the device will react to the beat of the background
music.
4. DMX Addressing/ DMX configuration
With this menu you can set the DMX address and choose a DMX configuration.
01)
Press the MODE button until the display shows .
02) Press the SETUP button to open this menu. You can choose 512 different DMX addresses.
03) Use the UP/DOWN buttons to select the required address from .
Once you have set the desired DMX address, you can also choose the desired DMX Mode.
04) Press the SETUP button again to choose one of the 3 different DMX Modes. Use the UP/DOWN buttons
to select 2, 3 or 5 channels in DMX mode.
5. Slave Mode
With this menu you can set the device as a Slave.
01)
Press the MODE button until the display shows .
02) If the device has not been set to slave, it is automatically classified as a master device. All slave
devices will follow the master movement. If the device has been set to slave, it will react the same as
its master device.