SHOWTEC Eventlite 177IR, Руководство пользователя

Страница: 11 / 28

10
Ordercode: 44010
EventLITE 177IR
Charging the built-in battery
01) In order to charge the battery, you need the included IEC power cable.
02) Turn off the power.
03) Connect the IEC power cable to the EventLITE 177IR.
04) Then plug the other end of the IEC power cable into a proper electric power supply socket.
05) While the battery is charging, the Red LED from the battery level indicator will light up and the Green
LEDs from the battery level indicator will light up in sequence.
06) When the battery is fully charged, all the Green LEDs from the battery level indicator will light up.
Important!
• Do not charge for more than 24 hours.
• Recharge within 3 days of use.
• Turn off the power with the power switch , when charging the battery!
Control Modes
There are 6 modes:
• Built-in programs
• Auto mode
• Static color mode
• Sound mode
• Master/Slave
• DMX-512 (2CH, 3CH, 5CH)
One EventLITE (Built-in programs, Auto mode and Static color mode)
01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) When the EventLITE is not connected with a DMX cable, it functions as a stand-alone device.
Please see pages 16-18 for more information about the Built-in programs, Auto mode and Static
color mode.
One EventLITE (Sound mode)
01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) Turn on the music. If the device is set to Sound mode, then the EventLITE will react to the beat of the
music. Please see page 17 for more information about the Sound mode.