SHOWTEC EventBAR 100IR, Руководство пользователя

Страница: 15 / 32

14
Ordercode: 44100
EventBAR 100IR
Control Panel
A. LED Display
B. Mode button
C. Setup Button
D. Up Button
E. Down Button
Fig. 05
DMX Control Mode
The fixtures are individually addressed on a data-link and connected to the controller.
The fixtures respond to the DMX signal from the controller. (When you select the DMX address and save it,
the controller will display the saved DMX address the next time.)
DMX Addressing
The control panel on the backside of the device allows you to assign the DMX fixture address, which is
the first channel from which the EventBAR will respond to the controller. Please note when you use the
controller, the unit has up to
24 channels. When using multiple EventBARs, make sure you set the DMX
addresses right. Therefore, the DMX address of the first EventBAR should be 1(d001) ; the DMX address of
the second EventBAR should be 1+24=25 (d025) ; the DMX address of the third EventBAR should be
25+24=49 (d049) , etc. Please, be sure that you do not have any overlapping channels in order to control
each EventBAR correctly. If two or more EventBARs are addressed similarly, they will work similarly.
Controlling:
After having addressed all EventBARs, you may now start operating these via your lighting controller.
Note: After switching on, the EventBAR will automatically detect whether DMX 512 data is received or
not. The problem may be:
• The XLR cable from the controller is not connected with the input of the EventBAR.
• The controller is switched off or defective, the cable or connector is defective, or the signal wires are
swapped in the input connector.
Note: It is necessary to insert a XLR termination plug (with 120 Ohm) in the last fixture in order to ensure
proper transmission on the DMX data link.
Display Off after 10 seconds
When no button is pressed for 10 seconds, the display will turn off. To light up the display, you have to
press the
Mode , Setup , Up or Down button. Once you have pressed the button, the display will light up.