SHOWTEC Dream Dancer DMX MKII V1, Руководство пользователя

Страница: 9 / 32

8
Ordercode: 42197
LED Lightbar 12 Pixel
One LED Lightbar 12 Pixel (Manual control)
01) Fasten the effect light onto firm trussing or place it on the floor. Leave at least 0,5 meter on all sides
for air circulation.
02) When the LED Lightbar is not connected by a DMX-cable, it functions as a stand-alone device.
03) If device is set to , then the fixture can be manually controlled.
04) Please see page 16 for more information about the Manual control mode.
Multiple LED Lightbars 12 Pixel ( Master/Slave control)
01) Fasten the effect light onto firm trussing or place it on the floor. Leave at least 0,5 meter on all sides
for air circulation.
02) Plug the end of the electric mains power cord into a proper electric power supply socket.
03) Use a 3-p XLR cable to connect the LED Lightbars and other devices.
The pins: 1. Earth
2. Signal (-)
3. Signal (+)
04) Link the units as shown in Fig. 02, connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second and third units. You can use the
same functions on the master device as described on pages 13-14 (Built-in Programs, Auto run). This
means you can set your desired operation mode on the master device and all slave devices will
react the same as the master device.
Multiple LED Lightbars 12 Pixel ( Master/Slave control)
Fig. 02