8
Installation
1)
Place the FX Shot on a flat, stable surface and secure it.
It is possible to install 1,2, or 4 FX Shots on the base plate.
2)
If the FX Shot is mounted onto a truss system, install 2 certified truss clamps (
70332
) at the bottom of
the FX Shot.
3)
Place the FX Shot in the desired position on the truss system and tighten the clamps securely.
4)
Always use a safety cable to secure the FX Shot to the truss system.
5)
You cannot link multiple FX Shots together via IEC IN - IEC OUT. You have to connect them separately
to AC power.
You can connect multiple shooters via one Schuko connection.
Schuko to 2 IEC splitter (
) Length: 3 m
Schuko to 3 IEC splitter (
) Length: 3 m
6)
Place an electric cannon in the cannon holder.
Do not connect the Ignition connector!!
As a result of the pressure, which is released during the shooting of confetti, the electric cannon can
come loose from the FX Shot.
Always use a Cannon Clamp (
60909
) to secure the electric cannon to the FX Shot.
Also use a Cannon Clamp (
70332
) when attaching the FX Shot onto a truss system.
Содержание 60908
Страница 16: ......
