SHOWTEC 50705, Руководство пользователя

Страница: 17 / 24

16
Order code: 50705
ColorCue 3
Insert a Step in a Chase
01)
In programming mode, press and hold down the INSERT button (38) for 3 seconds. The LED on the
button will light up.
02) Press the PLAYBACKS button (01)–(24) for which you want to insert a step in the chase. The LED on the
button will start blinking. The PLAYBACKS button number will be displayed on the screen.
03) Press the LEFT/RIGHT buttons (26)/(27) to select the place at which the new step will be inserted in the
chase.
Note: If you select step 01/05, the new step will become step 01 and the rest of the steps will be
renumbered automatically. When you finish creating the new step, the screen will show 01/06. If you
select 06/05, it means that the new step will be added at the end as step 06 to the chase.
04)
Press the INSERT button (38) again. The LED on the button will start blinking.
05) Create a new scene:
●
Double (12-fixture) mode – follow steps 2–6 from Create a Scene in Bank A on page 11. The
concept of Bank A and Bank B is not applicable in programming mode. Therefore the
connected fixtures can be selected only with the FIXTURES buttons and faders (01)–(12).
● Single (24-fixture) mode – follow steps 2–6 from Create a Scene on page 12.
06) Press the UPDATE button (42) to insert the new step. The LED on the UPDATE button (42) will light up.
When you release the button the LED will turn off. The LEDs on all buttons will blink 3 times to confirm
that the update is completed.
Playback Mode
In this mode you can play back the recorded scenes/chases.
The playback mode screen provides information about the selected PLAYBACKS button number, the
total number of steps in the chase, the step which is being played, the playback speed of the chase in
bpm (beats per minute) and the fade percentage.
Press the MODE button (32) repeatedly until the LED on the button lights up in green to activate playback
mode.
There are 2 playback options. Press the AUTO/SOUND button (35) to toggle between automatic and
sound-controlled playback.
●
Auto playback: The LED on the button will light up in red. The chase will play automatically.
● Sound-controlled playback: The LED on the button will light up in green. The chase will play
automatically reacting to the beat of the music. Turn the SOUND control (H) to adjust the sensitivity of
the built-in microphone. Make sure the parameter selection mode is enabled first.