SHOWTEC 50705, Руководство пользователя

Страница: 16 / 24

15
Order code: 50705
ColorCue 3
Delete a Step in a Chase
01)
In programming mode, press and hold down the DELETE button (40) for 3 seconds. The LED on the
button will light up.
02) Press the PLAYBACKS button (01)–(24) for which you want to delete a step in a chase. The LED on the
button will start blinking. The PLAYBACKS button number will be displayed on the screen.
03) Press the DOWN button (28) to navigate to the step level. The screen will show now:
04) Press the LEFT/RIGHT buttons (26)/(27) to select the step you want to delete. The screen will show the
selected step vs. the total numbers of steps in the chase. For example, 01/05 indicates selected
step 1 from a chase with 5 steps.
05) Press the UPDATE button (42) to delete the selected step. The LED on the button will turn on. When
you release the button, the LED will turn off.
Edit a Step in a Chase
01)
In programming mode, press and hold down the EDIT button (39) for 3 seconds. The LED on the
button will light up.
02) Press the PLAYBACKS button (01)–(24) for which you want to edit a step in the chase. The LED on the
button will start blinking. The PLAYBACKS button number will be displayed on the screen.
Note: At this point you can also adjust the chase parameters: direction, speed and fade. Make sure the
parameter selection mode is enabled. See Chase Parameters on page 14 for more information.
03) Press the LEFT/RIGHT buttons (26)/(27) to select the step you want to edit. The screen will show the
selected step vs. the total numbers of steps in the chase. For example, 01/05 indicates selected
step 1 from a chase with 5 steps.
04) Press the EDIT button (39) again. The LED on the button will start blinking.
05) Edit the step. You can either change the current color and intensity values for the selected fixtures in
the scene, or you can create a completely new scene. To adjust the values or to create a new
scene:
●
In double (12-fixture) mode – follow steps 2–6 from Create a Scene in Bank A on page 11. The
concept of Bank A and Bank B is not applicable in programming mode. Therefore the
connected fixtures can be selected only with the FIXTURES buttons and faders (01)–(12).
● In single (24-fixture) mode – follow steps 2–6 from Create a Scene on page 12.
06) Press the UPDATE button (42) to edit the selected step. The LED on the button will turn off.