SHOWTEC 50705, Руководство пользователя

Страница: 15 / 24

14
Order code: 50705
ColorCue 3
Note: One chase can have up to 100 steps. However, the maximum number of steps for all recorded
chases is limited to 1000 steps in total.
09)
Clear the programmer.
Chase Parameters
When you create a chase you can set the direction in which the steps will be played back, the playback
speed of a step and the fade percentage between steps. You can adjust those parameters after you
have created the first step in the chase. The settings will be applied to all steps in the chase.
It is possible to have multiple steps in a chase with different speeds. To change the speed after each
step, perform step 4 from Record a Chase straight after step 1. Continue repeating steps 1, 4 and 5 to
create the remaining steps in the chase.
It is not possible to have a different chase direction and fade percentage between the steps in a chase.
Make sure the parameter selection mode is enabled and the LED on the MANUAL button (31) is OFF. See
Color Selection Mode vs. Parameter Selection Mode on page 10 for more information.
Direction
Turn the DIRECTION control (E) to set the direction of the chase. There are 3 options available:
●
Off position (<) – the chase will play back in reverse order. The direction of the chase will be
displayed on the screen as <.
● Half position (<>) – the chase will bounce back and forth. The direction of the chase will be displayed
on the screen as <>.
● Full position (>) – the chase will play back forwards. The direction of the chase will be displayed on
the screen as >.
Speed
Turn the SPEED control (F) to set the speed of the chase. The adjustment range is between 0.1 and
600 bpm (beats per minute). The speed will be displayed on the screen.
Fade
Turn the FADE control (G) to set the amount of fading between the steps. The adjustment range is
between 0 and 100 %. The fade percentage will be displayed on the screen.
Delete a Chase/Scene
01)
In programming mode, press and hold down the DELETE button (40) for 3 seconds. The LED on the
button will light up.
02) Press the PLAYBACKS button (01)–(24) for which you want to delete the chase/scene. The LED on the
button will start blinking. The playback button number will be displayed on the screen.
03) Press the UPDATE button (42) to delete the chase/scene. The LED on the button will turn on. When
you release the button, the LED will turn off.