24
Kanjo Scan 60
Product code: 45012
Manual Control
In this menu you can enable manual control.
01)
Press the UP/DOWN buttons to choose between the following 2 options:
On:
Enable manual control
Off:
Disable manual control
02)
Press the ENTER button to confirm your choice.
Manual Control of the DMX Channels
When manual control is enabled, you can use the control panel to set the values of the DMX channels
manually.
●
Manual mode enabled, 8-CH DMX mode activated:
●
Manual mode enabled, 10-CH DMX mode activated:
01)
Enable manual control. See 6.6.9. Manual Control on page 24 for more information.
02)
Select 8-channel or 10-channel mode. See 6.6.3. DMX Channel Mode on page 22 for more
information.
03)
When in the main menu, press the UP/DOWN buttons to select the respective DMX channel. See
6.8. DMX Channels on page 25 for complete description of the DMX channels and values.
04)
Press the ENTER button to confirm the selection.
05)
Press the UP/DOWN buttons to adjust the value.
06)
Press the ENTER button to set the value.
