22
Kanjo Scan 60
Product code: 45012
DMX Channel Mode
In this menu you can select the DMX channel mode.
01)
Press the UP/DOWN buttons to select the desired DMX channel mode. There are 2 options available:
8 channels
10 channels
02)
Press the ENTER button to confirm the selection.
Master/Slave Mode
In this menu you can set the device as a master or a slave device in master/slave control mode.
01)
Press the UP/DOWN buttons to choose between the following 2 options:
MAST
The device operates as a master device and
runs the built-in program
SLAv
The device operates as a slave device
02)
Press the ENTER button to confirm your choice.
03)
Press the MENU button to return to the start screen and activate the built-in program.
Note:
●
If you do not return to the start screen, the built-in program will not be activated.
●
If no button is pressed, after 50 seconds of inactivity the display will return to the start screen
automatically and the built-in program will be started.
●
If you press a button to enter the main menu, the built-in program will hold. It will continue after you
press the MENU button to return to the start screen or after 50 seconds of inactivity.
Sound Mode
In this menu you can activate the sound-controlled operation mode.
01)
Press the UP/DOWN buttons to choose between the following 2 options:
On:
Sound-controlled operation mode is activated.
The device plays the built-in program reacting
to the beat of the music
Off:
Sound-controlled operation mode is disabled
02)
Press the ENTER button to confirm your choice.
