4
ACT Fresnel 150 WW
Product code: 34012
1.
Introduction
Before Using the Product
Important
Read and follow the instructions in this user manual before installing, operating or
servicing this product.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual.
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your
Highlite International dealer.
Your shipment includes:
●
Showtec ACT Fresnel 150 WW
●
Barndoor
●
Color frame
●
Schuko to power-pro cable (1,5 m)
●
User manual
Fig. 01
Intended Use
This device is intended for use as a professional theater spotlight and is suitable for indoor installation only.
It is not suitable for households or for general lighting.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Product Lifespan
This device is not designed for permanent operation. Disconnect the device from the electrical power
supply when it is not in use. This will reduce wear and improve the device’s lifespan.
LEDs Lifespan
The light output of LEDs gradually decrease over time (lumen depreciation). High operating temperatures
contribute to this process. The lifespan of LEDs can be extended by ensuring adequate ventilation and
operating the LEDs at the lowest possible brightness.
Text Conventions
Throughout the user manual the following text conventions are used:
●
Buttons:
All buttons are in bold lettering, for example “Press the UP/DOWN buttons”
●
References:
References to chapters and parts of the device are in bold lettering, for example:
“Refer to 2. Safety”, “turn the adjustment handle (06)”
●
0–255:
Defines a range of values
●
Notes:
Note: (in bold lettering) is followed by useful information or tips
