25
ACT Fresnel 150 WW
Product code: 34012
DMX Address
In this pop-up submenu you can set the DMX starting address of the device.
Press the UP/DOWN buttons to select the DMX starting address of the device. The selection range is
between 1 and 512.
Press the ENTER button to confirm the selection.
DMX Channel Mode
In this pop-up submenu you can select the DMX channel mode.
Press the UP/DOWN buttons to select the DMX channel mode. There are 2 options available:
●
1-channel mode
●
2-channel mode
Press the ENTER button to confirm the selection.
DMX Fail
In this pop-up submenu you can determine the behavior of the device in case there is no DMX signal.
Press the UP/DOWN buttons to select one of the following 3 options:
●
Manually Defined: The device will use the manually selected dimmer value. See 6.7.5.1.
Manually Defined on page 28 for more information.
●
Hold:
The device will use the last DMX signal received correctly.
●
Blackout:
The device will black out the light output.
Press the ENTER button to confirm the selection.
