Settings/General
Settings/Factory Default
Settings/DMX
Use the Up and Down buttons to select parameters and the Left and Right buttons to assign the different general
fixture settings. When finished, press the Check button to exit the menu level. The adjustable parameters are
described in Table 9.
Factory default menu settings can be recalled through this menu option. You can select if you wish to overwrite
the user edited presets and chases.
Use the Up and Down buttons to select parameters and the Left and Right buttons to assign the different settings.
When finished, press the Check button to exit the menu level. The adjustable parameters are described in Table 10.
DMX configuration options are available in the DMX menu.
Use the Up and Down buttons to select parameters and the Left and Right buttons to assign the fixture’s DMX settings.
When finished, press the Check button to exit the menu level. The adjustable parameters are described in Table 11.
Table 9: General Level Parameters
Table 11: DMX Setting Parameters
Parameter
Power-Up
Select the action of the fixture when the unit is powered ON. You can select from Off, Last Set, Color filters,
presets, and chases.
Dim Response
Select Normal or Incandescent dimming response.
Normal: Fixture LEDs dim with a normal response.
Incandescent: Fixture LED’s dim with an incandescent emulation response. The response to dimming
commands will be slightly delayed at lower intensities.
Dimming Curve
Select one of four dimming curve choices (see
for more information).
Dimming Curve Selection
Calibration
Fan Control
Toggle Harmonize Color Calibration on or off ( see
for more information).
Harmonize Color Calibration
Select Auto or Off fan operation (see DMX CONTROL for more information).
Description
Parameter
DMX Enable
Address
Assigns the fixture’s DMX start address.
Map
Select the DMX map for the fixture to use (see DMX CONTROL section for more information).
Off - Turn off all LED output.
Enable - Fixture will respond to DMX commands/signals.
disable - Fixture will ignore DMX commands/signals.
Last Action - restore the last menu action.
Power-up - follow the power-up value in the settings menu.
Hold - continue with the last DMX values received.
When no DMX
Selects the action of the fixture when the unit is powered ON and not receiving DMX
LED Group
Pan/Tilt Setting
Select the number of LED groups to control via DMX (see DMX CONTROL section for more information).
Set the parameters for Pan/Tilt
Description
Table 10: Facotry Default Parameters
Parameter
Protected
No - all menu items are able to be restored to factory defaults.
No - no action.
Preset & Chase - user edited Presets and Chases are not able to be restored to factory defaults.
Yes - restored to factory default menu settings.
To turn ON/OFF the feedback.
Load Factory
Service
Description
Operation and Programming
Installation & User’s Manual
SL BEAM 500 FX LED Luminaires
16
