![Showline SL BEAM 500 FX Скачать руководство пользователя страница 10](http://html.mh-extra.com/html/showline/sl-beam-500-fx/sl-beam-500-fx_installation-and-user-manual_1260167010.webp)
Connecting SL BEAM 500 FX to AC Power
Connecting SL BEAM 500 FX LED Luminaires to AC Power
If the luminaire is supplied with an AC input cable but you did not order an AC input connector, Table 2 describes how to
connect power to your SL BEAM 500 FX LED Luminaire. Field wiring of the SL BEAM 500 FX LED
Luminaire is straightforward. A total of 3 wires/conductors need to be brought to the luminaire. The following wiring
scheme is required:
Figure 3: SL BEAM 500 FX LED Luminaire AC Input & Output Connections
CAUTION: In the event the AC input cable of this luminaire is damaged, it must be replaced, with an approved cable
through an Authorized Showline Dealer or Service Center.
Brown
Main/Line(100 to 240VAC)
Blue
Neutral
Green/Yellow
Ground (Earth)
Table 2: SL BEAM 500 FX LED Luminaire (IP20 Rated Models) AC Input Connections
Wire Color
Purpose
2.
Connecting Power
Luminaires can be powered in one of two ways:
Direct connection to a AC power source using an AC input cable. For wiring of AC input connector refer to
,
"
"
Connecting SL BEAM 500 FX LED Luminaires to AC Power
below.
AC Input
AC Output
Neutral
AC Input Connector (on unit)
Main /
Ground / Earth
Line
AC Connector
(on side of unit
)
AC Output Connector (on unit)
Neutral
Main /
Ground / Earth
Line
AC Connector
(on side of unit
)
Installation & User’s Manual
SL BEAM 500 FX LED Luminaires
8