Additional Resources for DMX512
For more information on installing DMX512 control systems the following publication is available for purchase
,
from the United States Institute for Theatre Technology
(
), "
USITT
Recommended Practice for DMX512 A Guide
:
for Users and Installers 2nd edition
ISBN 9780955703522 USITT Contact Information
,
" (
:
).
:
USITT
315 South Crouse Avenue Suite 200
,
Syracuse NY 13210-1844
,
Phone 1.800.938.7488 or 1.315.463.6463
:
www usitt org
.
.
Showline Limited Two Year Warranty
-
Showline offers a two year limited warranty of its luminaires against defects in materials or workmanship from the
-
date of delivery A copy of Showline two year limited warranty containing specific terms and conditions can be
.
-
obtained by contacting your local Showline office
.
Warnings and Notices
When using electrical equipment, basic safety precautions should always be followed including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
Do not use outdoors.
Do not mount near gas or electric heaters.
Equipment should be mounted in locations and at heights where it will not readily be subject
to tampering by unauthorized personnel.
The use of accessory equipment not recommended by the manufacturer may cause an unsafe
condition.
Do not use this equipment for other than intended use.
Refer service to qualified personnel.
WARNING:
You must have access to a mains circuit breaker or other power disconnect device
before installing any wiring. BE sure that power is disconnected by removing fuses or turning the
mains circuit breaker off before installation. Installing the device with power on may expose you
to dangerous voltages and damage the device. A qualified electrician must perform this installation.
WARNING:
Refer to National Electrical Code
and local codes for cable specifications.
Failure to use proper cable can result in damage to equipment or danger to personnel.
WARNING:
This equipment is intended for installation in accordance with the Nation Electric
Code and local regulations. It is also intended for installation in indoor applications only. Before
any electrical work is performed, disconnect power at the circuit breaker or remove the fuse to
avoid shock or damage to the control. It is recommended that a qualified electrician perform this
installation.
Installation & User’s Manual
SL BEAM 500 FX LED Luminaires