Showa Denki Mistresa CRH Series, Руководство по эксплуатации

Страница: 18 / 48

− 16 −
④
The terminals A and B (with white leads) on the CRM-S, CRM-V,
and CRMH-S Series are for motor burnout prevention. See (4) for
their connection and use.
⑤
When using crimp terminals, either cover the crimp area with an
insulation tube, or use insulated type crimp terminals.
⑥
When wiring the power supply, immobilize the cable at the
cable port using a cable lock or similar means, so that external
force is not applied to terminals.
If a cable lock comes with a customized product, wire the
power supply as follows.
Procedure
:
1. Select the bush commensurate
with the cord from the
attached bushes.
2. Put the cord through the cord lock.
3. Tighten the fastener band to secure the cord in place. Check that
the cord is securely tightened.
Screw size
M3.5
Tightening torque
0.87N·m (max0.96N·
m)
Installation nut Main body
Bush S Bush M
Fastener band
Bush symbol
S
M
None
Applicable cord diameter (mm)
6.0 to 8.0
8.0 to 10.0
10.0 to 12.0
Models
CRM-H02, CRH-100T/E, CRH-200T/E
CRM(H)-H04, CRH-04E
CRM(H)-H07, CRH-07E
CRM(H)-H15, CRH-15E
CRM(H)-H22
AWG16 ( ≒ 1.25 mm
2
)
AWG16 ( ≒ 1.25 mm
2
)
AWG16 ( ≒ 1.25 mm
2
)
AWG14 ( ≒ 2.0 mm
2
)
AWG14 ( ≒ 2.0 mm
2
)
AWG16 ( ≒ 1.25 mm
2
)
AWG16 ( ≒ 1.25 mm
2
)
AWG16 ( ≒ 1.25 mm
2
)
AWG14 ( ≒ 2.0 mm
2
)
AWG14 ( ≒ 2.0 mm
2
)
Cross-sectional area of copper
conductor that supplies power
to the equipment Minimum cross-sectional area
of the external protection
copper conductor
Minimum cross-sectional area of the external protection copper conductor