Showa Denki Mistresa CRH Series, Руководство по эксплуатации

Страница: 29 / 48

− 27 −
d. Replacing the end demister/filter with a tapered cylinder
(
□□２→□□１ □□３→□□１
)
Remove the screws that lock down the side cover and detach the
side cover so that the end demister (end filter) on the main body
side is visible.
1
Pull out the end demister (end
filter).
2
S and V models
S and V models
To detach the outer cylinder and
install the filter frame, use a long
screwdriver (200 mm or longer
shaft). Smaller screwdrivers may
not reach the screws if the
handle gets stuck in the opening.
3
【
NOTE S and V models
】
For V model with end demister
Tuck the side demister in the
4 corners.
4
S and V models
For V model with end demister
Tuck the side demister in the
4 corners.
5
V model with end demister
Shaft
Handle