Showa Denki Mistresa CRH Series, Руководство по эксплуатации

Страница: 5 / 48

− ３ −
4. Items to check at product delivery
Although all our products are thoroughly tested and inspected prior to
shipment, the customer should nonetheless check the following items when
taking delivery of the Mistresa.
• Verify that the delivered product (model, etc.) is the same as
that which was ordered.
• Verify that the product has not been damaged or deformed ,
etc., during shipment.
• Verify that all the product accessories are present.
Operation & Cautions Manual
Front
(Primary)
filter
(for replacement)
Drain tube 2.5m
Hose band
(for drain tube)
Anti-vibration pads
Duct companion flange
Packing
(for duct companion flange)
Bolts + nuts
Hanger bolts
Crimp terminals
(1 spare)
Standard Accessories
Type
1 copy
1 piece
2 pieces
2 pieces
4 pieces
1 piece
1 sheet
4 sets
2 sets
7 sets
S2
□
only
S2
□
only
V2
□
only
* Two duct companion flanges come with the product – one for installing
the product and the other for connecting with the next machine. The
packings (for duct companion flanges) for CRM-S, CRMH-S Series are
affixed to the duct companion flanges.
CRM
−
S
Series
CRMH
−
S
Series
CRM
−
V
Series
CRH
Series
—
—
—
—
—
—
—
— —
— —
*
*
If necessary, store the Mistresa in ambient conditions below.
・
Indoor avoiding direct sun beams
・ Temperature between 0°C to 40°C
・ Humidity between 10% to 90% (No condensation)
Follow the instructions below if it is necessary to stop the operation or store
the Mistresa for 3 months or longer.
(1) Storing Mistresa in the original packaging
Store the Mistresa in a dry area indoor where the temperature does not
change much.
(2) Not operating the Mistresa after installation
Keep the Mistresa free from
"significant vibration"
and
"heat"
from
other machines and equipment.
It is recommended that the Mistresa be covered with a plastic sheet or the
like to keep it free from water, oil and dust.