Shoremaster ShorePort 1022950 Скачать руководство пользователя

Страница: 1 / 9

Shoreport

SHOREMASTER.COM

Shoreport

PRODUCT ASSEMBLY INSTRUCTIONS

To avoid the risk of personal injury or death, study and fully understand the proper installation

and operating procedures and safety precautions outlined in this owner’s manual.

NOT COMPLYING WITH THE PROCEDURES AND PRECAUTIONS OUTLINED IN THIS

MANUAL MAY RESULT IN PERSONAL INJURY OR DEATH AND WILL INVALIDATE THE

WARRANTY.

Use caution when handling gasoline; plastic creates static electricity and may ignite flamable

gases or liquids resulting in burns.

Never jump or dive into the water before the entire subsurface area has been checked for

depth. Not doing so may result in personal injury or death.

Do not run on the ShorePort; the ShorePort has uneven surfaces and may be slippery when

wet causing a falling injury.

Check bolts periodically to ensure hardware and connectors remain securely fastened.

If you have any questions about assembly, installation, use or suitability of this product,

contact an authorized dealer or ShoreMaster directly at 800-328-8945.

- PUT SAFETY FIRST

ShorePort PWC Lift

Instructions

1022950 - 58" x 138" Tan ShorePort

1029301 - 58" x 138" Gray ShorePort

Содержание ShorePort 1022950









