®
®
Shoreport
SHOREMASTER.COM
Parts List
DESCRIPTION
QTY
ITEM
4' x 10' Floating Poly Dock
1
1
ShorePort
1
2
Large Pipe Bracket wtih Connector
1
3
Poly Pipe Bracket / ShorePort Side Connector
1
4
Shoreport Rear Pipe Bracket with Hardware
1
5
2" Schedule 40 Pipe
2
6
ShorePort Parallel to Poly Dock
Failure to follow instructions may
result in personal injury and may
invalidate the applicable warranty.
Step 1.
Attach ShorePort to Poly Dock
using poly pipe bracket / ShorePort side
connector.
Step 2.
Attach poly pipe bracket to
ShorePort.
Step 3.
Slide 2" schedule 40 pipe into
pipe brackets and drive into ground using
post pounder.
Note:
DO NOT attach ShorePort to Poly
Dock using only poly pipe bracket /
ShorePort side connector you must also
use a pipe bracket on the outside of the
ShorePort (as shown).
1
4
6
3
2
5
6
Note:
See Connector Instructions for directions on how to
assemble ShorePort connectors.
DETAIL A
H
Parts List
DESCRIPTION
QTY
ITEM
ShorePort
1
1
Universal Stand-off Plate Assembly (Pair)
1
2
2" Schedule 40 Pipe
2
3
Shoreport Rear Pipe Bracket with Hardware
1
4
Medium Pipe Bracket with Hardware
1
5
Standing Dock or Sea Wall
1
6
Parts List
DESCRIPTION
QTY
ITEM
ShorePort
1
1
2" schedule 40 PIPE
2
2
Standing Dock or Sea Wall
1
3
Universal Stand-off Plate Assembly (Pair)
1
4
Large Pipe Bracket wtih Connector
2
5
A
1
4
2
3
6
ShorePort to Standing Dock or Sea Wall
Failure to follow instructions may result in personal
injury and may invalidate the applicable warranty.
Step 1.
Attach pipe brackets to ShorePort (as shown)
depending on how you want your ShorePort fastened to your
dock or sea wall.
Step 2.
Assemble and attach stand-off brackets to dock or
sea wall. If ShorePort is perpendicular to dock (as shown in
top picture) assemble stand-off brackets using last four holes
in plates so brackets will hold pipes further away from dock.
Measure from center of pipe bracket to the center of the other
pipe bracket and space stand-off brackets apart center to
center to that distance. If ShorePort is parallel to dock (as
shown in middle picture) assemble stand-off brackets so they
are as short as possible to keep ShorePort closer to the dock.
Measure from center of pipe bracket to the center of the other
pipe bracket and space stand-off brackets apart center to
center to that distance.
Step 3.
Float ShorePort up next to dock and slide pipe down
through pipe brackets. Align pipe up with stand-off brackets
and pound pipe into lake bottom using a sledge hammer or
post pounder.
Step 4.
Attach pipe to stand-off brackets using provided
U-bolts.
Note:
If your dock is too close to the water bolt the stand-off
brackets to a treated 2" x 8" and bolt the 2" x 8" to the dock
(as shown in Detail A).
1
5
3
4
5
2
Treated 2" x 8"
