Shore 935, Руководство по эксплуатации

Страница: 16 / 31

9
Model 935 Moisture Tester
OPERATION
Startup
When the tester is turned on, the self-test/calibration will start automatically for
the next moisture test. This self-test requires minimal manual intervention, and
the tester will then be ready to perform a moisture test with the last selected chart
without further adjustment of settings.
• To complete the self-test, follow the touchscreen prompts.
• To initiate a self-test at any time, use the power switch to the turn the tester off
and back on.
• To perform a moisture test with the
last selected chart (which is displayed
on the touchscreen when the self-test
is complete), follow the touchscreen
prompts.
• To select a different chart, perform a
Foreign Material or Damaged Kernel test
or change the moisture settings, press the
MENU button. Refer to “Main Menu” on
Page 10.
• To review or print any or all of the last twenty tests, press the HISTORY button.
Refer to “Test History” on Page 16.
• To specify the License Plate and/or the Batch/Lot on the printout for the next
moisture test(s), press the IDENTIFICATION button. Refer to “Tester ID” on
Page 16.