Shore 935, Руководство по эксплуатации

Страница: 4 / 31

Model 935 Moisture Tester
• To select a different chart, press
CHARTS SELECTION. Refer to Page
11.
• To perform Foreign Material or
Damaged Kernel tests, press
SPECIAL FUNCTIONS. Refer to
Page 12.
• To modify the tester settings, press
SETTINGS. Refer to Page 13.
• To return to the previous screen, press MOISTURE.
9. Ensure that the butterfly valve is in the locked-closed position by turning the
Dump Cell upside down, pressing and releasing the metal button on the side
of the cell and returning the cell to the upright position.
10. Place the Dump Cell in the center of a container that is suitable for catching
grain overflow.
11. Overfill the Dump Cell on the side with the ‘FILL THIS SIDE’ label and use the
leveling stick to level the grain in the Dump Cell.
12. Place the Dump Cell securely in the Grain Cell, and press the metal button on
the side of the Dump Cell to deposit the sample into the Grain Cell.
13. Remove the Dump Cell from the Grain Cell when prompted.
14. Allow the test to run, and wait for the
moisture, temperature, and test weight
readings to display on the screen.
Press the PRINT button to print the
results, if necessary.
15. Lift the Grain Cell out of the tester and
pour out the sample.
16. Test another sample or print prior results:
• To test another sample, place the Grain Cell back onto the tester as
described in Step 2, and repeat Steps 9 through 15.
• To print any or all of the last twenty
test results, place the Grain Cell back
onto the tester as described in Step 2
and press the HISTORY button. Refer
to “Test History” on Page 16.