Shore 935, Руководство по эксплуатации

Страница: 26 / 31

19
Model 935 Moisture Tester
cARE AND MAINTENANcE
care
• When handling the moisture tester, always support the bottom of the tester
housing.
• Keep the moisture tester away from the elements.
• Avoid shock and strong impacts to the base of the Grain Cell, as this cell is
connected to the scale.
• Ensure that the power cable is properly grounded to prevent damage to the
tester.
• Do not allow liquids to contact the electrical components of the tester.
• Avoid the use of radios, telephones, and two-way radios near the tester; these
devices can cause interference with the measurement process.
• The presence of foreign material on the interior or exterior of the Grain and
Dump Cells will affect the accuracy of the moisture reading. For example, rice
will deposit a thin layer of residue on the walls of the cells. Ensure that the
interior and exterior surfaces of the cells are clean prior to each test.
• Use a cloth moistened with water to clean all tester components. The use of
alcohol or other chemicals can damage internal tester components.
Maintenance
All Model 935 Moisture Testers are factory-calibrated with the manufacturer’s
Standard Tester.
For maintenance, send your tester complete in the original box, and with the power
source; shipping costs must be paid by the owner. Contact Shore Measuring
Systems using one of the methods listed on Page 7 to determine where to
send the tester for maintenance.
Software Update
The Model 935 Moisture Tester is designed for software updates to be
performed through a personal computer. Updates will be installed during periodic
maintenance, however if your tester requires a software update at any other time,
contact Shore’s Service Center for more information.