Shop fox W1867 Скачать руководство пользователя страница 47

Страница: 47 / 60

-45-

Model W1867/W1868/W1869 (For Machines Mfd. Since 11/18)

Electrical.Safety.Instructions

SHOCK.HAZARD.

Working on wiring that is

connected to a power source is extremely

dangerous. Touching electrified parts will

result in personal injury including but not

limited to severe burns, electrocution,

or death. Disconnect the power from

the machine before servicing electrical

components!

QUALIFIED.ELECTRICIAN.

Due to the inherent

hazards of electricity, only a qualified

electrician should perform wiring tasks on

this machine. If you are not a qualified

electrician, get help from one before

attempting any kind of wiring job.

WIRE.CONNECTIONS.

All connections must

be tight to prevent wires from loosening

during machine operation. Double-check all

wires disconnected or connected during any

wiring task to ensure tight connections.

WIRE/COMPONENT.DAMAGE..

Damaged wires

or components increase the risk of serious

personal injury, fire, or machine damage. If

you notice that any wires or components are

damaged while performing a wiring task,

replace those wires or components before

completing the task.

MODIFICATIONS

. Using aftermarket parts or

modifying the wiring beyond what is shown

in the diagram may lead to unpredictable

results, including serious injury or fire.

MOTOR.WIRING.

The motor wiring shown

in these diagrams is current at the time

of printing, but it may not match your

machine. Always use the wiring diagram

inside the motor junction box.

CAPACITORS/INVERTERS.

Some capacitors

and power inverters store an electrical

charge for up to 10 minutes after being

disconnected from the power source.

To reduce the risk of being shocked,

wait at least this long before working on

capacitors.

CIRCUIT.REQUIREMENTS.

You MUST follow

the requirements at the beginning of this

manual when connecting your machine to a

power source.

EXPERIENCING.DIFFICULTIES.

If you are

experiencing difficulties understanding

the information included in this section,

contact our Technical Support at

(360) 734-3482.

The photos and diagrams
included in this section are
best viewed in color. You
can view these pages in
color at www.shopfox.biz.

BLACK
WHITE

GREEN

RED

BLUE
BROWN

GRAY

ORANGE

YELLOW
YELLOW

GREEN
PURPLE

PINK

LIGHT

BLUE
BLUE

WHITE
TUR-

QUOISE

WIRING DIAGRAM COLOR KEY

These pages are current at the time of printing. However, in the spirit of improvement, we may make

changes to the electrical systems of future machines. Compare the manufacture date of your machine to

the one stated in this manual, and study this section carefully.

If there are differences between your machine and what is shown in this section, call Technical Support

at (360) 734-3482 for assistance BEFORE making any changes to the wiring on your machine. An updated

wiring diagram may be available.

Note:

Please gather the serial number and manufacture date of your

machine before calling. This information can be found on the main machine label.

electrical.warning.page

Содержание W1867





























































Результаты поиска

Содержание W1867

Отзывы:

Похожие инструкции для W1867

Бренды по названию

Популярные бренды

Shop fox W1867, Руководство пользователя

Результаты поиска

Содержание W1867

Отзывы:

Похожие инструкции для W1867

Бренды по названию

Популярные бренды