-20-
Model W1867/W1868/W1869 (For Machines Mfd. Since 11/18)
SE
TU
P
8.
Fully tighten all fasteners installed in
Steps.2–4
(see
Figures.11–12
).
9.
Have an assistant align intake barrel so dust port
points straight out from impeller housing (see
Figure.15
), then attach to impeller housing with (8)
5
⁄
16
"-18 x
1
⁄
2
" flange bolts.
Note:
For W1867 and W1868, align dust port on
right. For W1869, align dust port on left.
Figure.15.
Intake barrel attached to
impeller housing.
10.
Attach cyclone funnel to intake barrel, as shown in
Figure.16
, using (8)
5
⁄
16
"-18 x
3
⁄
4
" flange bolts and
(8)
5
⁄
16
"-18 hex nuts.
x 8
Intake
Barrel
Figure.16.
Attaching cyclone funnel to
intake barrel.
x 8
Intake
Barrel
Cyclone
Funnel
11.
Using fasteners attached to spring bracket, place
upper end of drum lock handle over outer stud on
spring bracket, then attach lock handle link to lower
hole on lock handle (see
Figure.17
).
Figure.17.
Lock handle attached to spring
bracket and lock handle link.
Outer Stud
(1 of 2)
Spring
Bracket
Lock
Handle
Link
Drum
Lock
Handle
Содержание W1867
Страница 57: ...Model W1867 W1868 W1869 For Machines Mfd Since 11 18...
Страница 60: ......
