Shop fox W1852, Руководство пользователя

Страница: 27 / 56

-25-
Model W1852 (For Machines Mfd. Since 11/17)
O
PE
R
ATIO
NS
Adjusting.Headstock
The Model W1852 headstock is equipped with a cam-
action clamping system to secure it to the lathe bed.
When the lever is tightened, a locking plate lifts up
underneath the bed and secures the headstock in place.
The headstock can be positioned anywhere along the
lathe bed.
To.position.headstock.along.length.of.bed,.do.these.
steps:
1. DISCONNECT MACHINE FROM POWER!
2. Loosen headstock lock lever (see Figure.19 ).
3. Slide headstock to desired location on bed, and use
headstock lock lever to secure headstock in position.
Note:.
The large clamping hex nut underneath the
headstock will require occasional adjusting to
ensure proper clamping pressure of the headstock
to the bed. Turn this hex nut in small increments to
fine tune the clamping pressure as needed.
Figure.19.
Headstock lock lever location.
Always. operate. lathe. with. headstock.
firmly. locked. to. bed.. Otherwise,.
serious. personal. injury. may. occur,.
as. workpiece. or. faceplate. could. shift.
during. operation. or. be. ejected. from.
lathe.
Headstock Lock
Lever
Adjusting.Tailstock
The tailstock adjusts in the same manner as the
headstock.
To.position.tailstock.along.length.of.bed,.do.these.
steps:
1.. Loosen tailstock lock lever and move tailstock to
desired position along bed, as shown in
Figure.20
.
2..
Re-tighten tailstock lock lever to secure tailstock to
bed.
Note:. The large clamping hex nut underneath the
tailstock will require occasional adjusting to ensure
proper clamping pressure of the tailstock to the
bed. Turn this hex nut in small increments to fine
tune the clamping pressure as needed.
Tailstock Lock
Lever
Figure.20.
Tailstock lock lever location.
Always. operate. lathe. with. tailstock.
firmly. locked. to. bed.. Otherwise,.
serious. personal. injury. may. occur. by.
tailstock.moving.during.operation.and.
workpiece.being.ejected.at.high.speed.