Shop fox W1852, Руководство пользователя

Страница: 22 / 56

-20-
Model W1852 (For Machines Mfd. Since 11/17)
SE
TU
P
8.. Place level on lathe bed and make necessary
adjustments so bed is level from side-to-side and
front-to-back.
— If you are using machine feet, adjust top and bot-
tom hex nuts on each leg to level bed; then tighten
hex nuts to secure these adjustments.
— If you are bolting lathe to floor, use shims under legs
to level bed; then tighten mounting fasteners.
9..
Insert tool rest into tool rest base and tighten tool
rest lock lever, as shown in Figure.14 .
6..
Remove top hex nut from feet, insert feet in leg
mounting holes (see Figure.13 ), then thread top hex
nut back on. DO NOT tighten hex nuts yet.
7..
Remove supporting block and repeat
Steps.5–6
on
other leg.
Figure.13. 1 of 4 machine feet installed.
Figure.14.
Tool rest installed on tool rest
base.
Tool Rest
Tool Rest
Lock Lever
Tool Rest Base