Shop fox W1749, Руководство пользователя

Страница: 39 / 52

-37-
W1749 9" Bandsaw
M
A
IN
TE
N
A
N
CE
MAINTENANCE
Lubrication
Since all bearings are sealed and per-
manently lubricated, simply leave them
alone until they need to be replaced. Do
not lubricate them.
Regular periodic maintenance on your
SHOP FOX
®
Model W1749 will ensure its optimum performance. Make
a habit of inspecting your machine each time you use it.
Check for the following conditions and repair or
replace when necessary:
• Loose mounting bolts.
•
Worn switch.
• Worn or damaged cords and plugs.
•
Damaged V-belt.
• Any other condition that could hamper the safe
operation of this machine.
Cleaning your bandsaw is relatively easy. Vacuum excess
wood chips and sawdust, and wipe off the remaining dust
with a dry cloth. If any resin has built up, use a resin dis-
solving cleaner to remove it.
Cleaning
General
MAKE SURE that your machine is
unplugged during all maintenance pro-
cedures! If this warning is ignored, seri-
ous personal injury may occur.
Wheel Brush
The bandsaw is equipped with a lower wheel brush.
The brush should be checked daily and cleaned when it
becomes dirty. The brush can be adjusted for wear. Refer
to
Adjusting Wheel Brush
on
Page 39
for adjustment
details.