Shop fox W1749, Руководство пользователя

Страница: 16 / 52

-14-
W1749 9" Bandsaw
SE
T
U
P
Figure 16.
Fastening table to trunnion.
Figure 17.
Carriage bolt, washers and
wingnut installed onto table.
Table
To install the table, do these steps:
1.
DISONNECT BANDSAW FROM POWER!
2.
Carefully slide the groove in the table past the
blade, and align the holes in the table and top of
the trunnion.
3.
Using a Phillips head screwdriver and 10mm wrench,
fasten the table to the trunnion with the
1
⁄
4
"-20 x
1
1
⁄
4
" flat head screws, lock washers, and hex nuts as
shown in
Figure 16
.
4.
Install the M6-1 x 20 carriage bolt into the slot
shown in
Figure 17
and secure with two flat washers
and a wing nut.