Shop fox W1692, Инструкция по эксплуатации

Страница: 14 / 48

12
Figure 8. Installed control panel assembly.
Figure 9. Knife setting jig.
The prewired control panel assembly needs to
be mounted to the planer stand.
To mount the control panel assembly, do
these steps:
1. Position the control panel support arm,
control box with the planer as shown in
Figure 8 .
2. Secure the assembly with the hex bolts, DO
NOT over-tighten or you can crack the
control panel support arm.
3. Connect the control panel wiring harness
plug to planer wiring harness plug.
Knife Setting Jig
We have provided a jig to make the knife
setting process easy and quick. See
Figure 7
for jig component identification while
assembling.
To assemble the knife setting jig, do these
steps:
1. Snap one of the E-clips over the notch on
one end of the knife setting rod.
2.
Slide the aluminum knife setting jig
brackets onto the rod.
3. Snap the other E-clip on the other end of
the knife setting rod.
DO NOT connect machine
to the power at this time!
Wait until all other
assembly instructions and
adjustments have been
completed.
Control Panel
Assembly
ASSEMBLY