Shop fox W1692, Инструкция по эксплуатации

Страница: 10 / 48

8
The following is a description of the
components shipped with the
SHOP FOX
®
W1692 15" Planer.
Should any parts be missing, examine the
packaging carefully to be sure parts are not
among the packing materials. If any parts are
missing, contact Woodstock International, Inc.
at 360-734-3482 or by e-mail at:
tech-support@shopfox.biz.
Box Contents
1. Planer Unit (Not Shown)
2. Dust Hood and Hardware
(3) Flange Bolt M6-1.0 x 12
(3) Flat Washer 6mm
(3) Hex Nut M6-1.0
(3) Lock Washer 6mm
(3) Cap Screw M6-1.0 x 12
3. Extension Roller Assembly and Hardware
(3) Hex Head Screw M8-1.25 x 20
(3) Setcrew M8-1.25 x 12
(3) Flat Washer 8mm
4. Knife Setting Jig Assembly
(1) Knife Setting Rod
(2) Knife setting gauge
(4) E-clip ring 9mm
5. Handwheel and Hardware
(1) Double Round End Key 4 x 4 x 10mm
(1) Hex Nut M10
(1) Flat Washer 10mm
(1) Direction Label
6. Crank Handle
7. Tools:
(1) 3mm Allen Wrench
(1) 4mm Allen Wrench
(1) 5mm Allen Wrench
(1) 6mm Allen Wrench
(1) 8mm & 10mm Combo Wrench
(1) 12mm & 14mm Combo Wrench
8. Control Box Hardware:
(3) Flat Washer 6mm
(3) Hex Head Screw M6-1.0 x 25
ASSEMBLY
Figure 2. Parts that need to be assembled.
Overview
DO NOT connect the
machine to power at this
time. The machine must
remain unplugged
throughout the entire
assembly process. Failure
to do this may result in
serious personal injury.
The factory has assembled most of your new
planer; however, depending on manufacture
date, some parts shown in
Figure 2
may still
need to be assembled after delivery. Please
take your time and try to be as accurate as
possible when following each step. This care
will provide you with better results when you
are finished.
Additional Tools Required:
Besides the tools
that were included with the planer, you will
also need a Phillips
®
screwdriver, a flat-head
screwdriver and a good straightedge. A set of
feeler gauges and a dial indicator will also be
necessary for the Adjustments section.
2
3
3
4
5
7
8
6
ASSEMBLY