OPERATIONS
-24-
Conveyor Table
Height Adjustments
The conveyor table height adjusts by turning the
handwheel shown in
Figure 26
.
Also shown is the table height scale that meas-
ures the movement of the table. This scale is
marked in both inches and millimeters. The
table height scale can be used as a quick guide
to matching workpiece thickness with table
height.
The conveyor table lock knob shown in
Figure
27
allows you to lock the table height after
adjustments have been made.
Feed Speed
The feed belt motor offers speeds of 13 and 16
FPM.
Figure 28
points out which sprockets are
responsible for which speeds.
Change the feed
belt speeds as follows:
1.
Unplug the power from the sander!
2.
Remove the feed belt motor cover by taking
out the cap screw that secures it.
3.
Loosen the four bolts at the motor mount
and slide the motor up. Pull the chain off of
the sprocket that it is currently on.
4.
Place the chain on the next sprocket and
slide the motor down to tighten the chain.
Hold the motor down and tighten the motor
mount bolts at the same time.
5.
Replace the motor cover before plugging
sander into power!
Figure 26.
Table height handwheel and scale.
Figure 27.
Handwheel movement diagram.
Figure 28.
Feed motor chain and sprockets.
Table
Height
Scale
Table Height Handwheel
Table Height Lock Knob
13 FPM
16 FPM
