ASSEMBLY
-11-
Beginning
Although the main components of the SHOP
FOX
®
W1689 are assembled at the factory, some
assembly is required. The following series of
instructions are the recommended sequence
best suited for final assembly.
Tools required that are not included:
A high
quality straightedge, a 45˚ angle gauge and an
adjustable wrench.
Handwheel Handle
Install the handle on the handwheel as fol-
lows:
1.
Make sure that the jam nut is threaded com-
pletely onto the handle.
2.
Use a flat-head screwdriver to thread the
handle all the way into the handwheel as
shown in
Figure 8
.
3.
Unthread the handle
1
⁄
2
a turn to make the
plastic sleeve loose enough rotate around
the handle freely.
4.
Tighten the jam nut down to the hand-
wheel.
Figure 8.
Handle installed on handwheel.
Make sure that your
machine is unplugged
during all assembly pro-
cedures! If this warning
is ignored, serious per-
sonal injury may occur.
